Parquet Oil

Luxdecor Extreme parquet oil is a preparation based on tung oil, which is the most durable natural oil. It is highly resistant. It brings out and highlights the natural beauty of wood. It prevents wood drying and cracking. It does not flake off. The oil also impregnates and protects the wood from weather conditions, such as moisture or UV radiation. Intended for wooden floors, parquets, stairs, etc.



Substrate preparation: The wood should be clean and dry. In the case of bare wood – polish with abrasive paper and dust off. In the case of varnished or waxed wood – sand down to expose bare wood and dust off. Surfaces exposed to insects, fungi and mould must be protected using a biocide agent.

Application: Perform oiling when wood moisture is below 20% and air humidity below 80%. Stir well before use. Repeat stirring from time to time to ensure even colouring of the surface.
Apply generously with a brush or cloth and rub the oil along wood grains. After 30 minutes, collect excess oil with a cloth. Leave for 12 hours and reapply in the same manner. Ultimately, the oil should be rubbed until dry. Leave for at least 24 hours until completely dry.

Reapplication: Oiling should be repeated twice a year. Spots exposed to intense use may require more frequent treatment.
For local renovation, slightly polish the parquet, dust it off and apply a layer of Parquet Oil. Leave to dry for 24 hours. Reapply if necessary.
For complete renovation, polish the parquet with abrasive paper, dust it off and then follow the procedure for the first application.

Note: Final effect depends on the level of wood polishing, wood type and method of application. Use products from a single production batch for painting larger surfaces, or pour contents of containers from various batches into one container and mix well.

Storage: Store at temperatures between 5 and 25°C in a tightly closed original container. Protect from freezing.

Expiry date stated on the package.

Additional information


18 – 35 m²/l (one layer) depends on the type of wood, the way it is finished and the degree of saturation


0,75 L, 2,5 L

Dry to touch

12 h

Application of another layer

after 12 h

Proper drying

24 h

Number of layers

1 – 2


contains tung oil, for indoor use, for interior and exterior (provided that protective varnish is used), UV resistant

Color card

Go to Top