Chalk-it Matt Varnish

Durable protection

Chalk-it Matt Varnish

A clear acrylic-polyurethane varnish for protecting surfaces decorated with Chalk-it Chalk Paint and bare wood. Ideal for indoor furniture, worktops, panelling and other wooden items. It is easy to use, with good adhesion and flow. It forms a durable coating with high resistance to water, alcohol, cleaning agents and mechanical damage. It does not yellow over time.

Key benefits

Durable coating

Solvent-free

Protects and decorates

Colourless

Enhances the natural colour of the wood

Durable coating

Solvent-free

Protects and decorates

Colourless

Enhances the natural colour of the wood

Technical data

Coverage

up to 12 m²/L per coat

Pack size

0.75 L

Touch dry

1 hour

Coats

2 Tool

brush, roller

Tool cleaning

water

Use

indoors

Finish

mattt

Other

14 days

How to use

Surface preparation:

The surface should be dry and clean, free from dust, grease, wax and other soiling. Sand old surfaces with fine-grit sandpaper and remove dust.

Varnishing:

Ambient temperature should be +10°C to +25°C. Stir the varnish thoroughly. With a brush or roller, apply a thin, even coat along the grain. Apply further coats after the previous one has dried (about 4 h). Avoid runs. Best results are achieved with fine-grit sanding between coats. After each coat, protect the surface from water, dust and dirt (avoid drafts indoors).

Note! Before varnishing the main surface, test in an inconspicuous area. Drying time and final appearance depend on the type, quality and moisture of the wood and on ambient conditions.

During and after painting, ventilate the room until the odour disappears.

Store at 5–25°C in a dry place, in the tightly closed original container. Protect from frost and direct sunlight.

Keep out of reach of children. If medical advice is needed, show the container or label.